Dealing With Overflow Of Water In The Toilet

Posted on: February 12, 2016 by in Water Damage
No Comments

A toilet is an essential component in every household. However, a toilet is one place which faces common problems. Either, due to blockage leading to an overflow, or the water system is damaged. So, it happens most of the plumbing repairs are done there. Sometimes, you can deal with the minor problems yourself, but it is advisable to contact a plumbing contractor or water damage restoration firm. To prevent all these eventualities, it is good you learn some basic things about how your toilet system works.

Flushing Problems

The initial step is to double check your water supply to confirm whether it is on. Often, flushing problems occur when some object or obstacles are preventing the flow of water. The problem does not require you to call a plumber; you can do it yourself. To avoid a lot of complications, just replace the valve with a new one. As the valve wears out from time to time, you need to get a replacement. Another cause may be the handle, so try to tighten it.

Overflow Problems

The other possible eventuality that can affect your toilet is if your flush tank is overflowing. Possible, reasons would be the flush ball, or the lever is worn out. You know that if you notice the water still flowing even after you release the handle or even sounds after you flush. Also, a damaged refill valve may cause overflow. So, when you check both conditions, you will decide whether just to clean it or replace with a new one.

What To Do With Non-Stop Water Flow

After even replacing the lever and flush ball, you notice there is still a constant overflow of water. It may be just a slight problem such as the setting of the flush ball. Try to solve the problem by adjusting the level of the ball to lower down. In case, your water comes with an intake assembly, then adjust the clip attached to the rod to lower the water level.

Water Leaks Through Handle And Flush Valve

This problem may be caused by either the position of the ball is not good, or there is a crack in the flush tank. First confirm there is no crack and if there is, then you need to replace the flash tank. If no crack then reposition the flush ball because it might be high leading to that overflow.

Tank leaks

Your toilet tank may be having some problems that are making it leak. So, before you contact a plumber, look around your toilet and confirm there is no crack, and all the bolts are tight. In case there are loose bolts, just tighten them, and if you get a crack then you just have to replace the toilet tank

Moisture And Condensation Around The Tank

During the cold weather, you are likely to see this kind of problem. One way to prevent this is to pop into hardware and buy insulation. Put the insulation in the tank as it will reduce the chance of moisture.

The above tips help you in two ways; to avoid overflow of water in the toilet and also to avoid the costly repairs.

Comments are closed.